Water Softeners Harveys Crown Non Electric Block Salt Softener With 15mm Fitting Kit
Five Year Parts and Labour Warranty
15mm Installation Kit Includes:
2 x 15mm Equal Tee valves
1 x 15mm Isolating valve
2 x 15mm Hoses, including washers.
1 x meter of Overflow Line
2 x meters of 3/8" Drain Line
1 x Water Test Kit
If you are in a very hard water area with ratings between 400 - 500 then please select the 500 model.
Meter Controlled Softener.
This Machine will only perform a regeneration based upon your water consumption, making it far more efficient than most other machines. Supplies the entire property with softened limescale free water.
WHY THIS IS THE ONE TO BUY?
The Harvey's Crown Non Electric Twin Tank Block Salt Softener differs in a number of ways from the traditional single tank units. The most obvious difference is the two tanks.
So why are two tanks better than one?
Single tank softeners cannot supply soft water whilst performing a regeneration program. All softeners need to perform regeneration as they all have a limited amount of water that they can soften. Regeneration effectively cleanses the resin to allow it to continue to produce soft water. A single tank machine will perform this action normally in the early hours of the morning. The disadvantage of this is you have the possibility of the softener doing this either before it has used up its full capacity or worse still running out if you suddenly use more water than the machine thinks you will (sometimes you don't know when extra guests will turn up, so you can't expect a water softener to).
As the Twin Tank has two tanks it can regenerate at any time of day or night as only one tank at a time is in service. When it has reached its capacity, it performs a regeneration whilst the other tank continues to supply you with soft water.
The Harvey's Twin Tank Non Electric Block Salt Water Softener caries a full five year parts and labour warranty (valid on purchases made after May 2014) This, alongside our proven track record for producing highly reliable equipment, has established us as one of the UK's most popular water softener companies.
MADE IN ENGLAND
The water softener is manufactured in the UK and is therefore designed specifically for the UK market. And for our domestic water system it also means that we, unlike other companies, "wet test” the softeners before they leave the factory. So you can rest assured that the water softener works correctly with no leaks.
Solvent free - food grade resin.
All EMWC Water Softeners incorporate a resin that has been specially purified for household use. It is both food grade and free from chlorinated solvents (solvent free). Not all manufacturers can offer you this level of specification. So whether you bathe in it, shower in it, wash your hair in it, your clothes, or simply brush your teeth with it, the water from your EMWC water Softener will not only be lovely and soft, but solvent free.
COMBINATION BOILERS AND PRESSURISED SYSTEMS
With more heating systems using either a combination boiler or a pressurised system, the need for a water softener with the available flow rate is of paramount importance. All of our water softeners have an unrivalled flow rate of up to 50 litres per minute, making them ideal for even the most demanding system.
Every softener comes complete with simple fitting instructions, waste & overflow hoses and an option of a Full Installation kit, allowing for installation by a plumber or DIY enthusiast.
Valve- Meter Controlled
Inlet/Outlet 3/4" Bsp male parralel
Overflow 1/2" Hose connector
Drain 3/8" O.D tubing
Max operating Pressure 8 bar (116 p.s.i )
Min Dynamic Operating Pressure 1 bar (14.5 p.s.i )
Max water temperature 30 degree C
Min water temperature Protect from freezing
BSI approved for use with aluminium heat exchange systems
VOLUME AND WEIGHT
Softener Resin volume 2x 4.3 litres
Resin Vessel Dimensions 140mm Diameter x 400mm high
Salt Storage capacity 2 x Block Salt
Depth 460mm - (17 inch approximately)
Height 490mm - (19 inch approximately)
Width 212mm - (8 1/2 inch approximately)
Please allow 20mm for the elbow connections on the side of the softener
Upto 508 Ltr Capacity per tank at 250ppm hardness
350 grammes Salt used per regeneration
65% Salt efficiency
40 litres / min peak flow at 2 bar pressure drop
30 litres / min Rated service flow at 1 bar pressure drop
23 litres Water used per Regeneration
1.9 1/ min Maximum flow rate to drain
11 Minutes Maximum Regeneration Time
< 1mg per litre Softened water hardness
Pressurised Systems (Mega Flo) = 22mm Kit
Standard Fittings (most Homes = 15 mm Kit
Standard Delivery by DPD (3-5 working days)
Next Day Delivery by DPD - €15.00
We are Here to Help
If you have any questions about our products, please pick up the phone and speak to one of our experts.
Our help line is open 9.00am - 5.00pm GMT, Monday to Friday.
If phone calls aren't for you, then our live chat is also available on our website 9.00am - 5.00pm GMT, Monday to Friday.
Have you already brought from us?
We're still here to help! Let us know how we can help and we will endeavour to answer any questions you may have.